|
|
Posted by terry on Thursday, July 03, 2008 at 12:23:05 :
In Reply to: M-601 Headlight Guards posted by Don Tucker in Oakland, MD on Thursday, July 03, 2008 at 10:33:21 :
the moldings are bolted on using the
3/8" bolts that come from the grill out into the rad support brackets. On my truck the nuts had rusted into the their captive brackets and broke them out. If yours are rusted it's a real pain especially if you want to save the moldings. Take your time and spray some rust busting lubricant in the area of the bolts. I believe that two on each side of the grill hold them on.