Posted by scottr on Friday, April 21, 2006 at 7:53PM :
In Reply to: paint finishing question posted by mclark on Friday, April 21, 2006 at 6:39PM :
What many body shops use and I have had trimendous success with is the following, A good ploisher (not a grinder) with a 3-M foam pad, start with 3-M perfect-it extra cut III this is a great polish/rubbing compound, then finish with a different foam pad and use 3-M perfect-it polishing compound.
you should have a great shine. One disclaimer, this is used on clear coats, I have not tried on a single stage, but would not hesitate.
Follow Ups: