Posted by Phil Kern on January 12, 2000 at 21:14:03:
In Reply to: Help needed in WC53 Windshield Disassembly posted by Gary W on January 10, 2000 at 14:26:23:
Power Wagon, WWII closed cab 1/2 ton and 3/4 ton windshield frames are all the same. Go ahead and cut the 1/4" bar that holds the upper and lower sections together, it is easy to fabricate a new one. The center section just unscrews at each end unless it's rusted, then drill it out. I had to center punch and drill the bar out on a drill press from the end, as well as through the two screw holes on each frame section. Soak it generously and keep drilling very carefully and eventually the pieces of the connecting bar will come out. A new one can be made, drilled and tapped to attached the sections.