Posted by Brian in Oregon on December 29, 1999 at 17:53:10:
In Reply to: 230 CID Engine Specifications posted by Ray Fried on December 29, 1999 at 16:47:49:
Valves:
0.010 intake cold initial.
0.015 exhaust cold initial
after intial wear in:
0.010 intake hot
0.014 exhaust hot
Head bolts: 65-70 ft lbs. Retorque after hot. Manual says nothing about intermediate stages of torque (like half, then finish as is common now).
Head torque pattern:
17 11 5 2 8 14 20
16 10 4 1 7 13 19
18 12 6 3 9 15 21
Front Rear
These specs are taken from the M37 manual for the T245 Military 230 engine.