Re: New Obstacle - PS Pump Belt and Clearances (Radiator Hose /

Posted by Will (in MI) on Monday, October 10, 2005 at 6:46PM :

In Reply to: Re: New Obstacle - PS Pump Belt and Clearances (Radiator Hose / posted by mannyc on Monday, October 10, 2005 at 6:36PM :

Manny,

I can't access the pictures through that link.

I made my own conversion because of the Hydraulic bell housing, but read his instructions, and don't remember anything about rotating the pump. I did have to make my own bracket, as the pump was hitting the mount and I moved the pump upward and outward.

I suspect because I also used the short snout water pump with the drivers side inlet (which has caused most of my fun), I'm in trouble.

If I could find a three grove lower pulley I guess I could more the pump forward one grove.

• My 1953 M37

Follow Ups:

• retry link - mannyc 8:09PM 10/10/2005
  • Thanks, You have the long snout Water pump. - Will (in MI) 8:21PM 10/10/2005
    • Re: Thanks, You have the long snout Water pump. - mannyc 8:40PM 10/10/2005
      • Probably should have gone that route ntxt - Will (in MI) 9:32PM 10/10/2005

Post a Followup