Posted by Vaughn on Monday, April 12, 2004 at 9:38PM :
In Reply to: Brake Light Switch ??? posted by J Gilly on Monday, April 12, 2004 at 7:44PM :
Assemble it all and fill the MC with brake fluid. Take a jar and fill a 1/4 with brake fluid. Attached a hose to the bleeder screw of the right rear cylinder (passenger side) and submerge the other end in the jar w/brake fluid. Open the bleeder screw and have a buddy pump the MC. This will push out air and suck in fluid. Do this for all cylinders to bleed the air out but make sure your checking the MC fluid level. As the final proces, give the MC some hard pumps and bleed each cylinder starting with the rear right, then left rear, right front, then left front.