Posted by Tug Boat Lonnie on Monday, October 27, 2003 at 4:59PM :
In Reply to: 12 volt problems posted by Steve Pellock on Monday, October 27, 2003 at 3:44PM :
I try to treat each item as a separate problem. Get a fluke or other voltage/ohm meter and see if you are getting voltage at the lamp or device. If you are, is it 12 volts or six volts? If it is 12, then check-replace the bulbs. Check for proper grounding, etc,. It might involve some wire tracing, but its a good way to learn the truck.
Best Wishes
Lonnie
Follow Ups: