Posted by Bruce in BC [172.68.143.195] on Tuesday, January 05, 2021 at 16:49:34 :
In Reply to: Galvanizing a frame posted by Johnd [162.158.79.200] on Monday, January 04, 2021 at 14:55:27 :
The acid gets in tight areas quite easily and is hard to get out of tight areas. The molten zinc will not weep or wick into real tight areas. So you have areas that will rust out quickly.
I had a few parts on the Carryall hot dipped - brackets and running boards. They seem to be holding up fine.