Posted by scott56 [172.69.23.18] on Friday, May 31, 2019 at 11:23:25 :
I printed them all out and went to the garage to read and decide what to do next. I am 90% certain the pump is good because I tested the output pressure at 5.5-6.0 psi and it fills a can with 3 oz fluid in 15 sec. This is with a the filter at the out put of the tank. Will remove that at some point. I have set up an external tank, removed the ceramic filter in front of the carb and replaced the rubber hose from the frame line to the pump input. That hose was new from VPW and I did not see anything wrong with it. All these items were present when I ran the engine for 1 hour with top RPM 2400 for 10-15 min. That is not a road test but proves the engine will run for a prolonged time.. The three times I have "run out of gas", the truck was running at 30 mph or so, not top rpms with a system that was unable to supply the needed amount of fuel. Let's see how the separate tank road test does. Thanks for the inputs, all valuable.
Follow Ups: