Posted by Willy-N on Saturday, March 15, 2003 at 11:44AM :
I got now on the Oil filter system, Thanks! On the PCV system for the 48 B-1 engine. I have the old style Blow/By Pipe on the side of the engine. It is about 1 inch in dia and vents the blow by gas into the air. Do I need a PCV Valve installed in this system and if so where dose it hook up? I see a different style of fitting on the picture in the book, instead of the pipe it is a Cap with a fitting to hook a hose to? Do they just not use a PCV Valve on the 48 B-1 engine? My fill tube is the sealed type with a treaded tap off the side and a plug in it. Thanks, Mark H.
Follow Ups: