Posted by Willy-N on Saturday, March 08, 2003 at 11:12AM :
In Reply to: Re: Leveling a Flat Bed to the Cab?? posted by MoparNorm on Saturday, March 08, 2003 at 9:43AM :
Mopar; I have a 8 ft level and a sheet rocker square and a framing sguare to use to get it right. I figured out the frame needs to go up 6 inches for the tires to clear enought. I also now have a way to shim it up so it will match the cab even if the bed or cab is out of line a little. I just won't drill the holes for the brackets till the cab is on the truck and in place. The brackets will hold the bed in place with out sliding off or out of place till then. Thanks for the help on this. Mark H.