Posted by dave horvath on Tuesday, February 11, 2003 at 8:27PM :
In Reply to: Getting educated on Power Wagon bed posted by Ron in Indiana on Tuesday, February 11, 2003 at 8:08PM :
Yes, 13/16ths is correct. You just need to make sure outer boards will fit under side angle on bed. This angle gets beaten down over the years and can make it a tight fit. If you are replacing side angle you can position it at any height to accomodate wood thickness.
Fender welting is available from VPWs or Roberts Motor Parts. It is the shiny welting with the small beaded edge.