Posted by Willy-N on Saturday, January 18, 2003 at 2:03PM :
In Reply to: Power Wagon: The Perfect Farm truck! posted by Chris Lube Lublin on Saturday, January 18, 2003 at 1:48PM :
Real Easy to adapt one from a 8N tractor and use the PTO Shaft and bearing to drive it. In fact I have a PTO Shaft with the right spline on EBay right now in perfect condistion for 36.00 closes in a little over a hour. You could weld a universal on the end of it to match the Drive line on your dodge then just extend a drive shaft to it. You could Take a peice of 1/4 thick X 3 inch pipe and weld a plate on each end, one end to match the bolt holes on the truck and one to match the belt pulley plate. Probley could not tell it from the real thing if you took your time on making the brackets for it. You could have a good set up for around 250.00 that you could work with. Mark