Posted by A.G. on Saturday, November 30, 2002 at 12:57PM :
In Reply to: Front locking hubs posted by Mark Toper on Wednesday, November 27, 2002 at 6:27PM :
Mark,
you can check the hub by locking it and while holding it, see if ytou can turn the inner hub/splines, if it does not turn when in the lock position then it is probably good, when unlocked the inner splines wil turn freely, you might also want to take it a part and look and also clean, alot of times hubs will not work right due to having to much grease in them, especially in colder times of the years, hope this helps.