Posted by 2 1/2 ton 20inch donno to ffpw on Friday, September 20, 2002 at 12:39PM :
In Reply to: Re: New twist on 20" wheels posted by Ken Dunnington on Friday, September 20, 2002 at 11:58AM :
Hey guys if ya want tha 20 inch wheels just find 2 1/2 ton m35 or grain truck with 9x20 wheels, then just get plates made and weld them in your self, i did it and so can you! You need a plasma cutter and old donors to practice on first, you can tack them up before and see if ya offset is right. It is very easy, if ya have problems call Henry at Airplane Tire
Company San Antonio Texas, he made the wheels and furnished the tires on tha baddest w300 on this page, check out AAA Blue Goosey 4 door crew in photo classified, those old wheels from ford are unsafe, they are too thin i have some and chunked them, do not use junk, beware they are for sale on forum and are junk junk no mater what is said, thin and not rated for pw with big motor and loads offroad! Get your ffpw wheeled also at www.usa6x6.com with hummer runflats or the m35 20 inch conversions by dan little! cHECK OUT THE ART WORK ON the michlins 20 inch muderrs he has! Fine!