Posted by mannyc on Tuesday, September 17, 2002 at 10:03AM :
In Reply to: Dumb distrib question posted by T-roy on Monday, September 16, 2002 at 11:00PM :
look to where the dist enters the block. on the lower left side (7 o'clock) position there is a bracket that holds the dist to the block. this bracket is held in place by a screw threaded into the block. use a nut driver, screwdriver (if it has a slot) or other tool to completely remove the screw and star washer. lift dist straight out. good luck. mannyc
Follow Ups: