Posted by sal on Thursday, July 25, 2002 at 8:26AM :
how far away from the flywheel is the clutch disc supposed to be when depressing the clutch? should it spin freely or with a drag? i have the driveshaft out at this point and when i turn the trans output shaft by hand and go through the gears the resistance is greater to a slight drag as i go from 1st to 4th.the reason i ask is that i cannot get the trans to go into gear when running, it grinds as if the clutch is not fully engaged. i have checked all of the related parts for adjustement and proper install but cannot find anything wrong.the clutch/pressure plate are new napa parts that i made sure were identical to the old. any ideas??? i have also tried to over adjust and still the same....thanks for any help anyone can spare....sal
Follow Ups: