Posted by Ryan in BC on Friday, July 12, 2002 at 8:52PM :
In Reply to: Re: Use a very large hammer with puller posted by Kurt Hirte on Friday, July 12, 2002 at 7:59PM :
I always use a hammer to pop the drums off of my vehicles. (Didn't know not too always taught that way.) If that didn't work then out came the blow torch. Heat the drum in between the studs till it is red go all around and until it lets out a big POP, then put on the gloves and pull it off. Its never failed me once and I've never screwed a set of drums. Usually though the hammer works fine. But check with the manual and make sure there is no hidden fastner or something. (I won't ever do THAT again LOL) Good luck.
Ryan