Posted by Tom on October 07, 1998 at 06:48:47:
In Reply to: Brake backing plates-replacing posted by galen on October 07, 1998 at 05:18:48:
Only the rear ones are riveted on. The front ones
fall off when you take the spindles off. So,
if you need to replace the fronts- no problem.
For the rears, personally, I would grind off the
rivets and then bolt the new ones on with grade
8 bolts and lock nuts. I would trust them more
than (me) trying to head those rivets.
Good luck.
Tom Jackson