Posted by Bert Wilson on September 12, 1998 at 13:51:50:
In Reply to: Re: Trying to make my clutch functional-someone mentioned slave cylinder seal to me posted by Steve on September 10, 1998 at 05:41:50:
Matt, The resevoir on the fire wall should be filled with brake fluid and the air bled at the clutch slave cylinder on the clutch linkage as a wheel cylinder would be. there should be a bleed valve there if not loosen the line while putting pressure on the clutch pedal. After bleeding it should function. If it leaks or bypasses the seals are available at any auto parts supply they should even have an assortment of seals you can pick from, they are the same as wheel and master cylinder seals. This set up is common on Dodge as well most severe duty trucks. Used parts should be easy to find.