Posted by RDavis on Sunday, May 19, 2002 at 9:54PM :
In Reply to: Correct Posture? posted by WAD on Sunday, May 19, 2002 at 5:26PM :
If you go to HOME on this website, then click "exterior diamentions", you will see diagram that shows some of these diamentions.
The info states that,
Frame to ground-front-no load @C/L of axle is 31&7/16".
Frame to ground-rear-no load @ C/L of axle
is 29&3/4". I find it odd that the front is higher than the back and it is possible that these numbers got switched but it is only a matter of a couple inches so the truck would look level in posture.
Your springs should have the correct arc if your frame measures as mentioned and you have a new set of tires to put the axle and spring mounting blocks at the correct height.
Anyway, the info is there to check out.