Posted by Jonas on Monday, May 06, 2002 at 10:49PM :
In Reply to: Re: Hubs for WDX posted by J Henry on Monday, May 06, 2002 at 9:30PM :
I think it's the superwinch hubs that are around $105 per set. Vintage or M.A.R.S. has/had them.
A neat trick I learned from the PWA, is to take a set of regular full time hubs, and have the splines turned out by a machine shop and have them stick a big ball bearing in the end of the hub for the stub end of the shaft to ride in. P ack them full of grease. I had it done to a set, and it cost about $35. Then keep a set of regular hubs under the seat for wintertime. A suggestion... always put regular hubs on in place of lockouts if you plan on doing any moderate 4 wheeling. I have a set of the Warn's and a set of the lever type and parts are too hard to find if you break one. You'll grenade a axleshaft before you tear up a original Power Wagon hub.
Follow Ups: