Posted by Steve in KY on Tuesday, April 23, 2002 at 6:01PM :
In Reply to: Kanter Parts posted by Galen on Tuesday, April 23, 2002 at 4:26PM :
Yes
The parts are OK. As an example, the MoPar gasket set for my DeSoto Hemi had copper rings around all the ports on the intake gaskets but the Kanter set did not. The parts did work. With he exception of cork and paper gaskets (due to ageing), I try to use MoPar if I can find them.
The bearings and rings are as good as I get from NAPA and CarQuest and are sometimes more reasonably priced.
So the parts are OK and it is far easier to get a kit from Kanter than to hunt down a bunch of obscure MoParts. On the other hand, if it's a keeper, I spend the time it takes!
Good Luck
Steve