Posted by Mark S. in Calif on Tuesday, February 26, 2002 at 9:52PM :
I am in need of the two clamps that hold the u-joint to the rear pinion yoke. Now this may not sound like a big deal but I am having no luck. All the u-joints on my 67 pw were the same except the rear. It had a small spicer type with u-bolts. I found the proper yoke for the pinion and had the drive shaft changed. I can use the front clamps for the time being. I am hoping someone on the talk group has the answer. The u-joint is a 5380 series if that helps. We have a great NAPA store here in Fallbrook that can pull some amazing things from the back room but even they are stumped. Thanks--Mark---