Posted by Dan on Monday, February 25, 2002 at 7:11AM :
In Reply to: Re: Part #? posted by Vaughn on Sunday, February 24, 2002 at 10:03PM :
The 4 output shafts in the xfer case all have the double seals that go into them, and I thought that the seals would just go in touching the actual housing, but there is a thin metal round sleeve that was pushed in the housing that the seals go into. Maybe this is a wear sleeve but It isn't .500 inches or .781 inches thick like the PW drivetrain survival manual shows. It is like 1/16th thick. Thanks