Re: Advice on installing a PTO


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Vaughn on Friday, February 08, 2002 at 10:37PM :

In Reply to: Advice on installing a PTO posted by Dave Speed on Friday, February 08, 2002 at 9:17PM :

This is a Fel Pro #'s, Current# 55379 Future# 15-2502. Not sure which one they are using now. Been a while since I bought one. You can get a .010 or .020 gasket. If you have a PTO plate on the transmissions right side, take it off. You will need to use either gasket that will give you some play in teeth mesh between PTO and cluster gear. I think you have the big spur gear transmission (drain plug in rear and parellel to it's bottom). If you do the correct PTO is case number 12525. If your transmission is not the big one and the PTO number is the same, you'll need a 1/4 inch spacer to adapt to the smaller spur gear.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com