Posted by Vaughn [172.69.140.145] on Tuesday, December 26, 2023 at 19:27:39 :
Well, I drilled and dropped, drilled, and dropped, the brake and TC bracket, squeezed and tucked, and finally came up with a mount that works. It places the levers about 1 inch higher and 1.5 inches to the right. I can�t shift it much to the left, I�ll gain about half an inch, so it is where it�s going to be, in the same position just a little higher and to the right. I�ll need to modify the floor cover to make it work which is easy to do, and I�ll add a bulge to the right side to give some clearance for the levers, which will also require the right floor plate to be modified as well. In the position that it is in, the E-brake and lever rods will need some tweaking to line up, however, it�s all workable. This should be the last mods required to make it all work - see images. As usual comments are welcomed. Thanks
Follow Ups: