Re: WTBFlathead 230 head head casting number 16XXXXX

Posted by Kaegi [172.71.150.199] on Monday, July 24, 2023 at 16:57:18 :

In Reply to: WTBFlathead 230 head head casting number 16XXXXX posted by DDD [172.68.35.22] on Sunday, July 23, 2023 at 22:58:00 :

I have never found the later head. I just shave .070" off the older heads. I have my cams ground by Delta Camshafts in Tacoma WA they will dress the lifters as well (must be done). all for less than 200 bucks. They need the cam more than anything. the earlier cams are designed for 70 octane fuel. running 89 is like race fuel so tons of room to increase lift and duration. totally wakes them up. makes it seem like a modern engine

• WC floor pan screws

Follow Ups:

• Re: WTBFlathead 230 head head casting number 16XXXXX - Vaughn 20:24:56 07/24/2023
  • Re: WTBFlathead 230 head head casting number 16XXXXX - Dozerman51 21:04:35 07/25/2023
    • I�ll try them � - DDD 10:22:34 07/26/2023
    • Re: WTBFlathead 230 head head casting number 16XXXXX - Vaughn 07:41:56 07/26/2023
• Re: WTBFlathead 230 head head casting number 16XXXXX - Dozerman51 19:48:07 07/24/2023
  • Re: WTBFlathead 230 head head casting number 16XXXXX - DDD 21:33:07 07/24/2023
    • Dozerman� you wrote this article.. - DDD 23:20:43 07/24/2023
      • Re: Dozerman� you wrote this article.. - Vaughn 09:29:56 07/25/2023
        • I seen that on epay.. - DDD 10:05:40 07/25/2023
          • Re: I seen that on epay.. - Vaughn 14:36:49 07/25/2023

Post a Followup