Posted by Craig [172.71.151.85] on Thursday, July 13, 2023 at 14:11:46 :
In Reply to: knuckle rebuild, bronze or cone bearing... posted by Daveinnvt [162.158.159.92] on Thursday, July 13, 2023 at 13:25:19 :
I used cone bearings on my 58 W100 but in 58 with the dana 44 that's what they had. The manual calls for pre-load so I do not think steering would be much different than the bronze. As for durability bronze will wear but they last thousands of tough miles do not think you will wear them out.