Posted by Vaughn [172.70.211.78] on Wednesday, February 22, 2023 at 08:28:52 :
In Reply to: lifting the cab off the frame posted by Karl [108.162.216.142] on Saturday, February 18, 2023 at 16:54:42 :
If you take off the bell housing, you'll need to check the crankshaft out-of-round bore, it can't be more than 0.0005 using a dial indicator. If it is, you'll need to adjust the bell housing. There are videos on YouTube that can help. If you don't do it, the crank bushing, tranny bearings will wear much faster causing premature failure of those items.