Posted by Greg Coffin [172.68.34.49] on Tuesday, January 17, 2023 at 17:24:47 :
In Reply to: Re: Wiring Harness; Headlights and Turn Signals posted by Torvald [172.71.151.102] on Tuesday, January 17, 2023 at 16:50:45 :
Try Here: https://www.waytekwire.com/item/46343/Eaton-s-Bussmann-15305-2-2-4-Mini-Fuse-Panel-/
These are the relays I used, but there are others too. They use a standard pin layout: https://www.waytekwire.com/item/75730/Song-Chuan-301-1A-C-R1-U03-12VDC-ISO-280-/
The relays are good for the horn, headlights, and any other high current loads.
Also, read this article and part 2 as well. It made the job much easier, and my work much more professional. It has tons of valuable info, and parts sources: http://www.bodenzord.com/archives/473
You don't need to do all the wire loom and shrink tubing, but it is fun! I can loan you the crimpers for the connectors, and I probably have a bunch of connectors around too if you want some.