Posted by Keith In Washington on Friday, February 01, 2002 at 5:52PM :
In Reply to: Looking for advise on Gear Vendors O/D installation posted by Keith@Toronto on Friday, February 01, 2002 at 4:02PM :
Gear vendors does not have an adaptor to go to the NP 200 transfer case in your PW. You could go to a NP 205 which Gear Vendors does have an adaptor. On the output from the Gear Vendor OD simply get the U joint with sliding yoke that fits the OD and have it welded into your current drive line. You will have to shorten the drive line anyway.