Posted by DDD [172.70.210.64] on Wednesday, November 09, 2022 at 09:26:42 :
In Reply to: M37 diff.. latest LARGE Diff posted by DDD [172.70.214.188] on Wednesday, November 09, 2022 at 09:15:03 :
I regret that I did not put both axle shafts into the diff while it was on the bench, and measure the distance from the inside of the axle flanges where they sit against the wheel hubs.
The distance from outer wheel hub to wheel
hub is a known. I can measure that by putting a tape measure thru the empty housing, end to end, to get this dimension easy enough
Once I slide in the shafts, I can’t see how far in they are into the side gears. I can’t tell total Engagement now, of the modified shafts splines area into the diffs side gears when it’s in the truck
If I had an extra larger 9-5/8” diff and two more loose 3/4 ton axle shafts, this would be easy, but I do not
Follow Ups: