Posted by Torvald [172.71.150.109] on Sunday, August 14, 2022 at 17:31:20 :
In Reply to: Hole plugs for cab floor posted by Torvald [108.162.246.110] on Thursday, August 11, 2022 at 20:50:29 :
Many thanks for the input from y’all.
Hmm, apparently the forum doesn’t do well with Microsoft Word, sorry for the question marks that appeared in place of apostrophes and fractions in the original message.
I checked Steel Rubber as Don in Oregon suggested and Oval Floor Plug kits on Amazon as Johnd suggested, but couldn’t find the correct size.
From the replies, I gather that these holes were probably left open, or at least the oblong ones were. I’m thinking I’ll use button plugs on the round holes and probably just cover the oblong ones with duct tape since finding the correct sized oblong plugs has been fruitless.
In looking through files of how other people restored these rigs I came across a nice picture that shows the 4 round holes and one of the oblong holes, so if you follow this link you can see what holes I was talking about. The picture is by dave horvath of the cab floor of his ’67.
https://imageevent.com/dad2nick/1967wm300?p=50&n=1&m=24&c=4&l=0&w=4&s=0&z=2
Follow Ups: