Posted by Bruce in BC [162.158.146.43] on Tuesday, June 14, 2022 at 16:34:43 :
In Reply to: Engine/Trany, Transfer Case, Rear Axle Pinion alignment posted by Torvald [162.158.107.214] on Tuesday, June 14, 2022 at 15:51:45 :
Traditionaly all those parts should run in plain with 1/2 a degree difference to have the U joints work properly and avoid vibration. That changes if there is a cartoon joint in the system. But what the Dodge factory set these at is another matter.
Follow Ups: