Posted by Dana in Ma [172.70.114.29] on Thursday, June 02, 2022 at 08:13:32 :
In Reply to: Re: Frame rivets posted by Greg Coffin [108.162.221.245] on Wednesday, June 01, 2022 at 16:17:16 :
Ha ha now thats the right hammer, now that I think about it I may have just used a big hammer with a anvil back-up. I welded a !" solid rod with a concave end turned in it, then welded to a a piece of I- beam set on the floor. Then I placed the round rivet head on the anvil and beat the other side with a big hammer when I did my PW front fenders.