Posted by Vaughn [162.158.255.243] on Monday, January 10, 2022 at 21:21:23 :
In Reply to: Re: Wait! posted by Marty [108.162.245.103] on Monday, January 10, 2022 at 20:20:39 :
The G741 manual doesn't say if it's ID or OD on the 1/3/4 and it is RH thread, and that's the one VPW is showing. I would just measure the old one. I would think based on the part manuals, either one would work fine on the 57 but I would try for the CC-1265637 or order both if VPW has them, that way you can compare both, there not very expensive. You're welcome Marty!
Follow Ups: