Posted by Bruce in BC [162.158.146.5] on Thursday, December 30, 2021 at 12:28:15 :
In Reply to: Re: Married NP205 posted by Marty [162.158.146.77] on Thursday, December 30, 2021 at 00:39:49 :
You can change the input shaft on any Dodge or Chevy 205 to get it to work. You can change yokes and stuff from any ford NP205 and swap into the NP205. All the output shafts on the Ford 205 were 32 spline - not the case for the Chev 205.
Also - I may be wrong - I was under the impression that Dodge used a sleeve to mate the male trans output to the male input on the Dodge 205- perhaps you can do something with the sleeve if this is the case. pretty sure I know of some guys who welded up miss matched sleeves.
All Dodge used the racetrack 8 bolt adapter join their input side. Later model Chev cases used the 6 bolt round pattern.
take care
Bruce
Divorced cases are different - i just double checked as i have a Ford divorced case sitting on the shop floor.
Follow Ups: