Posted by Matt Wilson [162.158.107.230] on Wednesday, November 24, 2021 at 21:00:05 :
In Reply to: Re: Ignition Timing Indicator posted by Marty [162.158.107.230] on Wednesday, November 24, 2021 at 06:13:51 :
I'm glad you mentioned that. I didn't know the M37 timing covers were different from the others, but I think some may have differences due to running thicker or thinner chain and sprockets.
I may just weld or bond a new pointer on it and locate it so that it points at the zero mark on the pulley when the #1 piston is at TDC. I'll have the head off because I'm assembling the engine as part of a rebuild.
In the end, I'll probably time it by vacuum initially and then check it against the timing light.
Follow Ups: