Posted by clueless [172.70.54.95] on Thursday, October 21, 2021 at 13:25:02 :
In Reply to: Re: Any sources for 9 5/8 housings with centered pumpkin posted by Gary Troxel [162.158.107.64] on Thursday, October 21, 2021 at 11:04:29 :
You may have me there but I don t think so
The hub wheel face location on the hub is inside an inch or so of the hub face on the 1 and 3/4 ton
As I recall dc confirmed that 1/2 hub will fit the 1 ton spindle
The 14 in drums are diff from the 1/2 to 1 to ton