Posted by Randy Baker on Tuesday, January 15, 2002 at 5:35PM :
In Reply to: Dropping the Oilpan posted by J-Gilly on Tuesday, January 15, 2002 at 2:33PM :
J-G,
I made sure the flange on the oil pan was flat before re-installing. Then I put form-a-gasket material on each side of the cork, hand tightened and let it set over night to let the form-a-gasket set up. Then I tightned it up good and snug, don't over tighten. Hasn't leaked yet and that was last summer.
Randy Baker
Clayton, CA