Posted by john eickhof [172.68.174.139] on Sunday, June 06, 2021 at 23:58:05 :
In Reply to: More Starter Woes posted by Glenn [162.158.75.35] on Sunday, June 06, 2021 at 06:48:08 :
check behind the body of the starter against the block...there may be interference causing the starter to be slightly askew causing gearmesh interference, i have seen the pan actually be gainst the starter as well as the engine casting thus the starter will not seat on the machined surface of the bell housing, there should be at least 1/8" clearance between the starter body and the engine block