Posted by John Eickhof [162.158.107.174] on Tuesday, February 02, 2021 at 21:45:07 :
In Reply to: Re: Bearing Shock posted by Craig in Texas [162.158.187.162] on Tuesday, February 02, 2021 at 19:17:53 :
i was taught by oskosh to shock the hubs on all drive axles when assembling on the spindles, i used a 4x4 and a 10 lb sledge hammer and would hit the hub a couple times and recheck bearing preload, never had a problem. ive done similar with smaller tools on t-cases and other bearing assemblies too.
Follow Ups: