Posted by Ray [162.158.187.194] on Wednesday, January 06, 2021 at 20:34:22 :
In Reply to: Re: Galvanizing a frame posted by Dana in Ma [108.162.219.243] on Wednesday, January 06, 2021 at 16:22:47 :
We had a service ramp, just drive off side of slope at barn onto two 6x18 planks, climb under change oil, and grease, take used oil from previous oil changed after settling, put in orchard sprayer and spray down under side of vehicle after each oil change, never rust on any vehicles at home