Another type of Cab Mount

Posted by Paul ( in NY) [162.158.63.13] on Tuesday, December 15, 2020 at 18:13:31 :

In Reply to: Cab mounts posted by Marty [162.158.107.208] on Tuesday, December 15, 2020 at 13:22:19 :

The 1970 Danish WM-300 used a entirely different
cab mounting system. The front of the cab was mounted on square blocks of dense rubber roughly 3" x 3" x 1.250" thick.

The rear had a piece of channel iron bolted to the bottom of the cab, running door to door and bolted to the floor. The rear was mounted as a single point. You can see the mount in the picture. It was a isolation as will as a sudo gimble. I am sure Denmark did studies on the Dodge mount system and developed their own. They did changes also on other parts of the body/frame.

Paul

• PW Repairs YOU CAN DO with text and pictures

Follow Ups:

• Re: Another type of Cab Mount - Keith in Washington 20:14:37 12/15/2020
  • Re: Another type of Cab Mount - Marty 20:58:31 12/15/2020
    • I found them! - Marty 22:18:42 12/15/2020
      • Re: I found them! - Ray 22:39:31 12/15/2020
      • Re: I found them! - Bob 22:34:16 12/15/2020
        • Re: I found them! - Marty 23:02:51 12/15/2020
          • So...More Questions... - Marty 23:22:52 12/15/2020
            • Is this what you read - Clint Dixon 13:28:07 12/16/2020
              • Re: Is this what you read - Marty 19:03:29 12/16/2020
            • Re: So...More Questions... - Bob 07:44:07 12/16/2020

Post a Followup