Posted by Johnd [108.162.219.217] on Thursday, September 03, 2020 at 05:09:58 :
In Reply to: Regulator problem posted by Jonathan Sprague [162.158.74.224] on Wednesday, September 02, 2020 at 16:22:43 :
I think you just need to adjust the spring tension on the Relay contacts so the relay coil can overcome the spring tension to open the contacts when needed.
Here is a great service manual on delco generators and regulators. Most of us dont have carbon piles to create a load, but you can use an inexpensive battery tester with a heating element to draw the battery voltage down when testing.
Follow Ups: