Posted by Keith in Washington [108.162.245.29] on Saturday, August 22, 2020 at 17:25:43 :
In Reply to: Re: Making own wire harness posted by Dana in Ma [108.162.219.81] on Saturday, August 22, 2020 at 16:08:19 :
Agreed. The only time I would buy a Painless or similar harness is if it were designed to fit a specific vehicle. If your not going for an exact original PW, I would question the need for spending so much for a commercially made harness. The wiring is so simple on these trucks and a lot of it was wrapped in tape, so why spend so much.