Posted by Marty [108.162.245.109] on Tuesday, November 05, 2019 at 11:08:28 :
In Reply to: Re: Need a set of drums posted by Steve in FH [172.68.230.115] on Tuesday, November 05, 2019 at 03:06:36 :
Hi Steve, certainly any machine shop is fully capable of such an operation but you’ll probably find that a machine shop that doesn’t do them regularly is going to charge more. Like if you search google or Hemmings magazine you’ll find many shops that specialize in wheel cylinders & master cylinders. They just bore the cylinder slightly larger, press a sleeve in that’s the same bore as the cylinder originally was & then bore the holes in the sides.
Follow Ups: