Posted by Milo in Pa [172.69.63.114] on Monday, September 30, 2019 at 00:06:24 :
In Reply to: FFPW Transmission Swap posted by Dean Dysart [172.69.42.85] on Sunday, September 29, 2019 at 22:06:58 :
When I put a new clutch plate in mine I took the floor boards out. unhooked the 4x4 levers and held them back with a tarp strap put a chain around then unhooked the drive shaft took out the 4 bolts and while holding it with the engine lift I slid it back and lowered it to the floor. After putting the clutch it I picked it back up and it slid right in place