Posted by Tom in Indiana [172.69.90.49] on Sunday, July 21, 2019 at 17:58:54 :
In Reply to: Re: Power Steering unit posted by Milo in Pa [173.245.54.52] on Sunday, July 21, 2019 at 10:35:55 :
Smart move! I was going to do the same for the Saginaw pump, but ended up doing the 360 swap and not needing to. On the box/frame clearance, I did the same as you, also- heated it up nice and hot with a torch, then used a giant Crescent wrench to bend the lip upward.